Industrial Distribution Terminal Blocks Screw type
Closed bolt leading hole will not only facilitate operation of screwdrivers, also prevent the bolt from dropping out;
Electric potential distribution is realized by either connecting central adaptor to the center of terminal or inserting a side adaptor to the cone jack;
General auxiliaries,such as end plate,segment spacer, and spacer, are attached for terminal with multiple sections;
The insulating shell is made if imported engineering plastic polyamides(Nylon)66,which is of high mechanical intensity, good electrical conductivity, and super flexibility;
Two ends on the top with white marking system to realize uniformed sign.
• 500V
• Good workmanship
• Stable performance
• Easy to install
• Segment test terminal latest structure
• Rich accessories to meet the needs of different occasions
| Wiring data | UUK-2.5/2-2-GY | UUK-2.5/2-2PE |
| Strip Length | 9 | 9 |
| AWG | 24 ~ 12 | 24 ~ 12 |
| Rigid conductor cross section | 0.2 mm² ~ 4 mm² | 0.2 mm² ~ 4 mm² |
| Flexible conductor cross section | 0.2 mm² ~ 4 mm² | 0.2 mm² ~ 4 mm² |
| Minimum wiring capacity of single wire | 0.2 | 0.2 |
| Maximum wiring capacity of single strand wire | 4 | 4 |
| Minimum wiring capacity of multi-strand wires | 0.2 | 0.2 |
| Maximum wiring capacity of multi-strand wires | 4 | 4 |
| Incoming line direction | Side Cable Entry | Side Cable Entry |
| Width(mm) | 5.2 | 5.2 |
| Height(mm) | 65.4 | 65.4 |
| Deep (mm) | 46.9 | 46.9 |
| NS 35/7.5 | 47.5 | 47.5 |
| NS35/15 | 55 | 55 |
| IEC parameters | UUK-2.5/2-2-GY | UUK-2.5/2-2PE |
| Rated impulse withstand voltage | 6kV | 6kV |
| Rated voltage | 500 | |
| Rated current | 24 |
| UL parameters | UUK-2.5/2-2-GY | UUK-2.5/2-2PE |
| Rated voltage | ||
| Rated current |
| Material specifications | UUK-2.5/2-2-GY | UUK-2.5/2-2PE |
| Color | Grey | Yellow & Green |
| Flammability rating | V0 | V0 |
| Pollution level | 3 | 3 |
| Insulation material group | I | I |
| Insulation Materials | PA66 | PA66 |
| Standards and Norms | UUK-2.5/2-2-GY | UUK-2.5/2-2PE |
| Connections comply with standards | IEC 60947-7-1 GB14048.7.1 |
IEC 60947-7-2 GB14048.7.2 |
