Advantage
Industrial Distribution Terminal Blocks Screw type
Closed bolt leading hole will not only facilitate operation of screwdrivers, also prevent the bolt from dropping out;
Electric potential distribution is realized by either connecting central adaptor to the center of terminal or inserting a side adaptor to the cone jack;
General auxiliaries,such as end plate,segment spacer, and spacer, are attached for terminal with multiple sections;
The insulating shell is made if imported engineering plastic polyamides(Nylon)66,which is of high mechanical intensity, good electrical conductivity, and super flexibility;
Two ends on the top with white marking system to realize uniformed sign.
• Good workmanship
• Stable performance
• Easy to install
• Segment test terminal latest structure
• Rich accessories to meet the needs of different occasions
PRODUCT DETAIL DATA
Product properties |
UUK-4RD/LA250 |
Wiring Diagram |
|
Product Classification |
Cantilever fuse terminal for 5 x 20 mm type G fuse, with LED, for 250 V AC/DC |
Product Type |
Screw Type Terminal Block |
Product Series |
UUK |
Connect Number |
2 |
Industry |
Power Industry
Factory engineering
process control
Mechanical Engineering
Railway industry |
Potential |
1 |
Wiring data |
UUK-4RD/LA250 |
Strip Length |
9 |
AWG |
24 ~ 10 |
Rigid conductor cross section |
0.2 mm² ~ 6 mm² |
Flexible conductor cross section |
0.2 mm² ~ 6 mm² |
Minimum wiring capacity of single wire |
0.2 |
Maximum wiring capacity of single strand wire |
6 |
Minimum wiring capacity of multi-strand wires |
0.2 |
Maximum wiring capacity of multi-strand wires |
6 |
Incoming line direction |
Side Cable Entry |
Width(mm) |
6.2 |
Height(mm) |
57.8 |
Deep (mm) |
75.6 |
NS 35/7.5 |
75.6 |
NS35/15 |
83.1 |
IEC parameters |
UUK-4RD/LA250 |
Rated impulse withstand voltage |
6kV |
Rated voltage |
250 |
Rated current |
6.3 |
UL parameters |
UUK-4RD/LA250 |
Rated voltage |
|
Rated current |
|
Material specifications |
UUK-4RD/LA250 |
Color |
Block |
Flammability rating |
V0 |
Pollution level |
3 |
Insulation material group |
I |
Insulation Materials |
PA66 |
Standards and Norms |
UUK-4RD/LA250 |
Connections comply with standards |
IEC 60947-7-3
GB14048.7.3 |