Advantage
Industrial Distribution Terminal Blocks Screw type
Closed bolt leading hole will not only facilitate operation of screwdrivers, also prevent the bolt from dropping out;
Electric potential distribution is realized by either connecting central adaptor to the center of terminal or inserting a side adaptor to the cone jack;
General auxiliaries,such as end plate,segment spacer, and spacer, are attached for terminal with multiple sections;
The insulating shell is made if imported engineering plastic polyamides(Nylon)66,which is of high mechanical intensity, good electrical conductivity, and super flexibility;
Two ends on the top with white marking system to realize uniformed sign.
• Good workmanship
• Stable performance
• Easy to install
• Segment test terminal latest structure
• Rich accessories to meet the needs of different occasions
PRODUCT DETAIL DATA
| Product properties |
UUK-6-GY |
UUK-6PE |
| Wiring Diagram |
|
|
| Product Classification |
Straight-through terminal block |
Straight-through terminal block Ground Terminal Block |
| Product Type |
Screw Type Terminal Block |
Screw Type Terminal Block |
| Product Series |
UUK |
UUK |
| Connect Number |
2 |
2 |
| Industry |
Power Industry
Factory engineering
process control
Mechanical Engineering
Railway industry |
Power Industry
Factory engineering
process control
Mechanical Engineering
Railway industry |
| Potential |
1 |
1 |
| Wiring data |
UUK-6-GY |
UUK-6PE |
| Strip Length |
10 |
10 |
| AWG |
24 ~ 8 |
24 ~ 8 |
| Rigid conductor cross section |
0.2 mm² ~ 10 mm² |
0.2 mm² ~ 10 mm² |
| Flexible conductor cross section |
0.2 mm² ~ 10 mm² |
0.2 mm² ~ 10 mm² |
| Minimum wiring capacity of single wire |
0.2 |
0.2 |
| Maximum wiring capacity of single strand wire |
10 |
10 |
| Minimum wiring capacity of multi-strand wires |
0.2 |
0.2 |
| Maximum wiring capacity of multi-strand wires |
10 |
10 |
| Incoming line direction |
Side Cable Entry |
Side Cable Entry |
| Width(mm) |
8.2 |
8.2 |
| Height(mm) |
47.7 |
47.7 |
| Deep (mm) |
46.9 |
46.9 |
| NS 35/7.5 |
47.5 |
47.5 |
| NS35/15 |
55 |
55 |
| IEC parameters |
UUK-6-GY |
UUK-6PE |
| Rated impulse withstand voltage |
8kV |
8kV |
| Rated voltage |
1000 |
|
| Rated current |
41 |
|
| UL parameters |
UUK-6-GY |
UUK-6PE |
| Rated voltage |
|
|
| Rated current |
|
|
| Material specifications |
UUK-6-GY |
UUK-6PE |
| Color |
Grey |
Yellow & Green |
| Flammability rating |
V0 |
V0 |
| Pollution level |
3 |
3 |
| Insulation material group |
I |
I |
| Insulation Materials |
PA66 |
PA66 |
| Standards and Norms |
UUK-6-GY |
UUK-6PE |
| Connections comply with standards |
IEC 60947-7-1
GB14048.7.1 |
IEC 60947-7-2
GB14048.7.2 |
